D9.0 SYSTEM MANAGEMENT STANDARDS AND APPLICATION PROFILES

D9.1 Systems Engineering
The term Systems Engineering is used to describe an interdisciplinary, collaborative approach to derive, evolve, and verify a life-cycle balanced system solution which satisfies customer expectations and meets public acceptability. The process includes the planning, implementation, and control of the total effort to develop a total system solution in response to the user requirement and external constraints.

Standard
[ E ]

IEEE 1220

1994
(Feb 1995)
Trial Use Standard

Application and Management of the Systems Engineering Process

D9.2 Integrated Logistics Support
The term Integrated Logistics Support (ILS) is used to describe a disciplined management approach, affecting both customer and industry, aimed at optimizing equipment Life-cycle Costs. It includes elements for influencing equipment design and determining support requirements to achieve supportable and supported equipment.

Profile
[E]

UK DEF STAN 0060

Interim Issue 1 1994

Application of Integrated Logistic Support (ILS)

Standard
[ T ]

AC/305(SLM) - D23

Orientation Document for Integrated Logistic Support Within the Framework of Multinational Equipment Projects

Handbook
[ T ]

MIL-HDBK 59B NOT 1

No S/S Document

Canceled
10 Sep 1997

Continuous Acquisition and Life-cycle Support(CALS) Implementation Guide

D9.3 Configuration Management
Configuration management provides the technical and administrative direction and surveillance actions taken to identify and document the functional and physical characteristics of a configuration item, to control the changes to a configuration item and its characteristics, and to record and report change processing and implementation status.

Standard [E]	ISO/CD 9004		Quality Management Systems - Guidelines for Performance Improvements
Standard [E]	ISO/CD 9004 - 1	1994	Quality Management and Quality System Elements Part 1 - Guidelines
Standard [E]	ISO 9004 - 2 ISO 9004 - 2 Cor. 1	1991 1994	Part 2 - Guidelines for Services
Standard [E]	ISO 9004 - 3	1993	Part 3 - Guidelines for Processed Materials
Standard [E]	ISO 9004 - 4 ISO 9004 - 4 Cor. 1	1993 1994	Part 4 - Guidelines for Quality Improvement
Standard [E]	ISO/IEC 10164 - 1 ISO/IEC 10164 - 1 Amd. 1 ISO/IEC 10164 - 1 Amd. 1 Cor. 1	1993 1996 1996	Information Technology - Open Systems Interconnection - Systems Management Part 1 - Object Management Function Implementation of Conformance Statement Proformas
Standard [E]	ISO/IEC 10164 - 2 ISO/IEC 10164 - 2 Amd. 1 ISO/IEC 10164 - 2 Amd. 1 Cor. 1 ISO/IEC 10164 - 2 Cor. 1	1993 1996 1996 1996	Part 2 - State Management Function Implementation Conformance Statement Proformas
Standard [E]	ISO/IEC 10164 - 3 ISO/IEC 10164 - 3 Amd. 1 ISO/IEC 10164 - 3 Amd. 1 Cor. 1	1993 1996 1996	Part 3 - Attributes for Representing Relationships Implementation of Conformance Statement Proformas
Standard [E]	ISO/IEC 10164 - 4 ISO/IEC 10164 - 4 Amd. 1 ISO/IEC 10164 - 4 Amd. 1 Cor. 1 ISO/IEC 10164 - 4 Cor. 1 ISO/IEC 10164 - 4 CD Cor. 2	1992 1995 1996 1994	Part 4 - Alarm Reporting Function Implementation of Conformance Statement Proformas
Standard [E]	ISO/IEC 10164 - 5 ISO/IEC 10164 - 5 Amd. 1 ISO/IEC 10164 - 5 Amd. 1 Cor. 1 ISO/IEC 10164 - 5 Cor. 1 ISO/IEC 10164 - 5 CD Cor. 2	1993 1995 1996 1994	Part 5 - Event Report Management Function Implementation of Conformance Statement Proformas
Standard [E]	ISO/IEC 10164 - 6 ISO/IEC 10164 - 6 Amd. 1 ISO/IEC 10164 - 6 Amd. 1 Cor. 1 ISO/IEC 10164 - 6 CD Amd. 2	1993 1996 1996	Part 6 - Log Control Function Implementation of Conformance Statement Proformas
Standard [E]	ISO/IEC 10164 - 7 ISO/IEC 10164 - 7 Amd. 1 ISO/IEC 10164 - 7 Amd. 1 Cor. 1	1992 1995 1996	Part 7 - Security alarm reporting Function Implementation Conformance Statement Proformas
Standard [E]	ISO/IEC 10164 - 8 ISO/IEC 10164 - 8 Cor. 1 ISO/IEC 10164 - 8 Cor. 2 ISO/IEC 10164 - 8 Cor. 3	1993 1995 1996 1999	Part 8 - Security Audit Trail Function
Standard [E]	ISO/IEC 10164 - 9 ISO/IEC 10164 - 9 Cor. 1	1995 1996	Part 9 - Objects and Attributes for Access Control
Standard [E]	ISO/IEC 10164 - 10 ISO/IEC 10164 - 10 Amd. 1 ISO/IEC 10164 - 10 Cor. 1	1995 1998 1999	Part 10 - Usage Metering Function for Accounting Purposes Implementation Conformance State Proformas
Standard [E]	ISO/IEC 10164 - 11 ISO/IEC 10164 - 11 Amd. 1 ISO/IEC 10164 - 11 Cor. 1	1994 1998 1999	Part 11 - Metric Objects and Attributes Implementation Conformance State Proformas
Standard [E]	ISO/IEC 10164 - 12 ISO/IEC 10164 - 12 Cor. 1 ISO/IEC 10164 - 12 Cor. 2	1994 1998 1999	Part 12 - Test Management Function
Standard [E]	ISO/IEC 10164 - 13 ISO/IEC 10164 - 13 Amd. 1 ISO/IEC 10164 - 13 Cor. 1	1995 1999 1999	Part 13 - Summarization Function Implementation Conformance State Proformas
Standard [E]	ISO/IEC 10164 - 14 ISO/IEC 10164 - 14 Cor. 1	1996	Part 14 - Confidence and Diagnostic Test Categories
Standard [E]	ISO/IEC 10164 - 15 ISO/IEC 10164 - 15 Cor. 1	1995 1999	Part 15 - Scheduling Function
Standard [E]	ISO/IEC 10164 - 16 ISO/IEC 10164 - 16 Amd. 1	1997 1998	Part 16 - Management Knowledge Management Function Extension for General Relationship Model
Standard [E]	ISO/IEC 10164 - 17 ISO/IEC 10164 - 17 Cor. 1	1996 1999	Part 17 - Change Over Function
Standard [E]	ISO/IEC 10164 - 18 ISO/IEC 10164 - 18 Cor. 1	1997 1999	Part 18 - Software Management Function
Standard [E]	ISO/IEC 10164 - 19	1998	Part 19 - Management Domain and Management Policy Management Function
Standard [E]	ISO/IEC 10164 - 20	1999	Part 20 - Time Management Function
Standard [E]	ISO/IEC 10164 - 21	1998	Part 21 - Command Sequencer for Systems Management
Standard [E]	ISO/IEC FCD 10164 - 22		Part 22 - Response Time Monitoring Function
Standard [T]	STANAG 4159	Ed 2	NATO Materiel Configuration Management Policy and Procedures for multi-national Joint Projects
Standard [T]	MIL-STD-973		Configuration Management Practices for Systems, Equipment, Munitions, and Computer Programs.
Profile [N]	MIL-STD-483A NOT 1 S/S MIL-STD-973	Canceled	Configuration Management Practices for Systems, Equipment, Munitions, and Computer Programs.
Standard [ ]	MIL-STD-498 NOT 1 S/S IEEE/EIA 12207.0 - 12207.2	Canceled	Configuration Management and Software Development.

Note: The Policy and applicable standards for NATO Configuration Management have not yet been determined, but the NCMB/NICG -sponsored Acquisition Workshop held in 1994-1995 has this topic under consideration.

D9.4 Environmental Life-cycle Assessment
Environmental issues are becoming increasingly important and this field is undergoing rapid advancement and change. Not only is the body of knowledge increasing but the demand for consistent, usable guidelines and reliable standards is also becoming obvious. In the face of environmental claims, it is essential to know the environmental impact of product design, usage throughout the life-cycle, and ultimate disposal. Although this topic is not specific to CALS, users and regulatory bodies will require access, throughout a product life-cycle, to reliable information to assist in the development of regulations, operating instructions, and disposal programs which recognize environmental issue.

Standard [ E ]	ISO 14040	1997	Environmental Management Life-cycle Assessment - Principles and Framework
Standard [ E ]	ISO 14041	1998	Life-cycle Assessment - Goal and Scope Definition and Inventory Analysis
Standard [ E ]	ISO/FDIS 14042	1999	Life-cycle Impact Assessment
Profile [ ]

Note: The Policy for Life-cycle Assessment and applicable standards for NATO assessment of environmental impacts have not yet been determined, but the NCMB/NICG -sponsored Acquisition and Operational Logistics Workshops held during 1994 -1996 have Life-cycle matters under consideration.

D9.5 Disposal of Equipment
This paragraph will consider the methodology required for defense equipment disposal in the future.

· Montreal Convention Particular reference will be made to the standards applicable to the disposal of products which require special handling (e.g., Radioactive, Toxic, Corrosive, Poisonous, etc) and to the life-cycle data requirements of products covered by the Montreal Convention.
· UN List - Although no standard applicable to disposal of hazardous items has yet been identified, some information is contained in a document know as "The UN List"
· UN Recommendations on the Transport of Dangerous Goods ST/SG/AC.10/1 Rev 5 Chapter 2
· UN Publication Sales No E87 VIII.1 ISBN 92-1-13 9023-0

Reference may also be made to NATO mechanisms which exist [STANAGS] or are under development [E.G., NAMSA SHARE] to assist in formulating disposal methodology.

U.S. DoD MIL-STD-1388 contains some data elements which carry information appropriate to the U.S. Disposals Process but this standard is currently being reviewed pending its withdrawal.

Standard [ ]			TBD
Profile [ ]

D9.6 Quality Management
Although Quality Management is in no way specific to CALS, quality assessments may well be based on data acquired through CALS tools and the appropriate standards are therefore relevant.

However, it is not possible to recommend a specific approach to quality management. The CALS operating environment should be analyzed and the quality requirements determined from user requirements. The user requirements, which must be well defined, should determine the selection of the most critical factors in order to assess an acceptable level of service of the required quality.

Standard [R]	ISO 8402	1994	Quality - Vocabulary
Standard [R]	ISO/CD 9000		Quality Management Systems- Fundamentals and Vocabulary
Standard [R]	ISO 9000 - 1	1994	Quality Management and Quality Assurance Standards Part 1 - Guidelines for Selection and Use
Standard [R]	ISO 9000 - 2	1997	Part 2 - Generic Guidelines for the Application of ISO 9001, ISO 9002, and ISO 9003
Standard [R]	ISO 9000 - 3	1997	Part 3 - Guidelines for the Application of ISO 9001: 1994 to the Development, Supply, Installation, and Maintenance of Computer Software
Standard [R]	ISO 9000 - 4	1993	Part 4 - Guide to Dependability Program Management
Standard [R]	ISO 9001 ISO/CD 9001 ISO 9001 Cor. 1	1994 1995	Quality Systems - Model for Quality Assurance in Design, Development, Production, Installation, and Servicing. Quality Management Systems - Requirements
Standard [R]	ISO/CD 9004		-Quality Management Systems - Guidelines for Performance Improvements.
Standard [R]	ISO 9004 - 1	1994	Quality Management and Quality Systems Elements Part 1 - Guideline
Standard [R]	ISO 9004 - 2 ISO 9004 - 2 Cor. 1	1991 1994	Part 2 - Guidelines for Services
Standard [R]	ISO 9004 - 3	1993	Part 3 - Guidelines for Processed Materials
Standard [R]	ISO 9004 - 4 ISO 9004 - 4 Cor. 1	1993 1994	Part 4 - Guidelines for Quality Improvement
Standard [R]	STANAG 4107		Mutual Acceptance of Government Quality Assurance
Standard [T]	AQAP 1		NATO Requirements for an Industrial Quality Control Program
Standard [T]	AQAP 13		NATO Software Quality Control System Requirements.

Note: Quality Standards for NATO CALS applications have not yet been verified.